-- 

Consumer of distribution licensee. 

Cumulative solar energy capacity should not exceed 75% of the distribution transformer’s capacity.  

• One meter needs to be installed at the generator end after the inverter, on the ground floor of the premises, and a bi-directional meter needs to be installed at the same location where the meter for consumption is installed.
• Installation of check meters is optional.
• As per the Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 and the Central Electricity Authority (Installation and Operation of Meters) Amendments Regulations, 2010, as amended from time to time.
• Distribution licensee shall test, install, and jointly inspect and seal the meters on behalf of both parties.

• All costs related to setting up of meters shall be borne by the eligible consumer. 

Interconnection framework shall address parameters including connecting voltage level and minimum technical standards for interconnection following relevant regulations and orders.